Advertisement
Step 4
B17 ctr
(4)
The door track assembly supports the
sliding doors and reinforces the front
wall. It is made up of three pieces.
1
Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2
Insert four screws from the
underside only.
Hint: The holes in the top side of the
door track assembly are for fastening
the gable to the top of the front wall
in a later step.
3
Position door slides onto the legs,
from the end of door track assembly,
as shown in the end view.
4
Set this piece aside for later use.
9378
STEP
4
94 5/8"
240,3 cm
94 5/8" 240,3 cm
Parts Needed For
Door Track Assembly
STEP
6617
Painted Part
66769
STEP
3
NOTE:
Door Track Splice (painted part)
6617
9378
9378
STEP
1
2
Long Leg
on top.
Door Slide
17
6617 Door Track Splice (1)
9378 Door Track (2)
66769
Long Leg
on Top
Short Leg
on Bottom
END VIEW
CORRECT
INCORRECT
9378
Advertisement
