Step 4: Configure Fortisiem Via Gui - Fortinet FSM-500F Configuration Manual

Appliance Setup
4. Run get to check the available FortiSIEM commands.
5. Use the below commands to check the hardware information. After running each command, ensure that there are
no errors in the displayed output.
Command
get system status
diagnose hardware info
diagnose interface detail
port0

Step 4: Configure FortiSIEM via GUI

1. Log in as user root with the password you set in
2. At the command prompt, go to /usr/local/bin, and enter configFSM.sh. For example:
# configFSM.sh
A simple GUI will open.
3. In the GUI, select 1 Set Timezone, and then press Next.
4. Select your Region, then press Next.
FortiSIEM 6.3.1 500F Collector Configuration Guide
Fortinet Technologies Inc.
Note this password—you will need it in a later step.
Description
Displays system name, version and serial
number.
Displays system hardware information like
CPUs, Memory and RAID information.
Displays interface status.
Step 3 above.
5