Setting The Data Code - Canon MV MV4 Instruction Book

Setting the data code

E
You can also choose to display camera data (shutter speed and exposure settings)
in cassette data codes.
( )
PLAY
VCR
( 34)
To change, open the menu and select DISP.SET UP. Then select DATA
CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and
close the menu.
Possible data code combinations:
D/TIME SEL.
Date
Time
Date & Time
• The data code will read "– – –" in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camera's
memory.
– If the tape was recorded on a camera without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on MV4/MV4i/MV4i MC is played back on a different DV
camcorder, the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS (
set to OFF through the menu.
76
DISP.SET UP
DATA CODE
(cassette
Date/Time
only)
1.JAN.2001
12:00:00 AM
12:00 AM
1.JAN.2001
DATA CODE•••DATE/TIME
Camera data
F11
1/2000
F11
1/2000
F11
1/2000
Date/Time &
Camera data
F11
1/2000
1.JAN.2001
F11
1/2000
12:00:00 AM
F11
1/2000
12:00 AM
1.JAN.2001
142) has been