Canon MV MV4 Instruction Book page 136

? The playback picture is rough
(with mosaic-like noise).
E
? There's no picture on the TV
screen, even though the tape is
moving.
? There's no sound coming from the
speaker during playback.
Memory card operations MV4i MC only
Problem
? The memory card will not insert.
? The
mark flashes red in the
display even though a memory
card has been inserted.
? Nothing happens when I press the
buttons.
136
• The video heads need cleaning
( 131).
• The video heads need cleaning
( 131).
• The TV/VIDEO selector on the TV
isn't set to VIDEO (
• The speaker has been turned off with
the SELECT dial (
• Headphones are being used.
Cause and/or what to do about it
• It is not turned the right way (
Turn it the right way and try inserting
again.
• Turn the camcorder's power off and
back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
• The POWER dial is not set to CARD
REC or CARD PLAY (
• The memory card is not inserted
( 109).
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ( 115) or insert a new
memory card.
• The power source is not properly
connected ( 9), or the battery pack
is exhausted or not properly attached
( 10).
• The function can not be used in that
recording program (
27).
26).
99).
103, 107).
53).