Effect - Canon MV MV4 Instruction Book

8. If you're in MOVIE or
E
P.SCAN mode:
If you're in PLAY (MV4i
or MV4i MC:VCR) mode: Fade in- Press the
Operating effects
Sound records/plays back normally.
When operating effects in MOVIE, P.SCAN or CARD REC mode, make sure the
program selector is set to Q.
PLAY
MOVIE P.SCAN
D.EFFECTS
( 34)
Select effect
1. Open the menu and select D.EFFECTS.
2. Select D.E.SELECT.
3. Select EFFECT.
• You return to the D.EFFECTS submenu.
4. Select EFFECT again (the name of the previously selected effect
also appears).
• ART, BLK&WHT, SEPIA, MOSAIC settings appear.
5. Select the desired setting.
• The menu returns to the submenu.
6. Close the menu.
• The menu disappears and the name of your selected setting flashes in the
display.
Effect on/off
7. If you're in PLAY (MV4i and MV4i MC:VCR) mode, press the
e
(play) button.
8. Press the D.EFFECTS ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or
deactivated.
62
( )
CARD
VCR
R E C
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
Fade out- Press the
D.E.SELECT••EFFECT
e
(play) button.
a
(pause) button.
EFFECT••••••ART