Canon MV MV4 Instruction Book page 110

G
Erasing still images
Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection first in order to
erase an image.
E
• Erase images with caution. Once an image has been erased, it cannot be restored.
There are 3 ways to erase a single image.
To erase images one at a time
➡ CARD PHOTO REVIEW menu (
1.
CARD
R E C
➡ File Operation menu
2.
CARD
PLAY
To erase images one at a time or erase all images on the memory card at once
➡ Card Operations submenu
3.
CARD
PLAY
: When playing back an image in CARD PLAY mode
SINGLE
: When displaying an index screen in CARD PLAY mode
INDEX
CARD PHOTO REVIEW
CARD
R E C
1. During/after recoding a still image, press the CARD – button to
open the CARD PHOTO REVIEW menu.
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a still image, the menu appears
immediately.
• PROTECT
• If you select |RETURN, the still image disappears.
To protect an image
2. Select PROTECT
• The
• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
• If you select |RETURN, the still image disappears.
To erase an image
2. Select IMAGE ERASE and press the SELECT dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the SELECT dial in.
• The image is erased.
110
SINGLE
, IMAGE ERASE settings appear.
and press the SELECT dial in.
protect mark appears on the image.
110)
( 111)
( 115)
SINGLE