Table of Contents
Advertisement
Transferring
Video
Recordings
to a
Computer
(IEEE1394)
You can transfer
recordings
to a computer
equipped
with a IEEE1394
(DV) terminal
or
IEEE1394
capture
board. Use the editing
software
supplied
with your computer/capture
board to transfer
video recording
from tape to computer.
Refer to the instruction
manual
of
the software.
A driver is preinstalled
on Windows
operating
systems
later than Windows
98 Second
Edition and Mac operating
systems
later than Mac OS 9, and will be installed
automatically.
IEEE1394 (DV) terminal
Commercially available DV cable
__
[_
L====J
6-pin
4-pin
O Operation
may not work correctly
depending
on the software
and the
specifications/settings
of your computer.
O If the computer
freezes
while you have connected
the camcorder,
disconnect
and reconnect
the DV cable. If the problem
persists,
disconnect
the interface
cable, turn off camcorder
and computer,
turn camcorder
and computer
back on
and reconnect
them.
O Before
connecting
the camcorder
to the computer
using a DV cable, make sure
that camcorder
and computer
are not connected
with a USB cable, and that no
other
1394 device
is connected
to the computer.
O We recommend
powering
the camcorder
from a household
power source while
it is connected
to the computer.
O Refer
also to the instruction
manual
of the computer.
88
Advertisement
Table of Contents
