Canon LU A 8S Instruction Manual page 78

Tu[ning Qff _b_ Image S_biJize[
The image stabilizer compensates for camcorder shake even at full telephoto. It tries to
compensate for horizontal movements; therefore, you may decide to turn it off when you
mount the camcorder on a tripod.
°°"° ]L J
([_38) CAMERA SETUP _ IMG STAB((_))...ON
Open the menu and select [CAMERA SETUP]. Select [IMG STAB((_))], set
it to [OFF] and close the menu.
"((t))" disappears.
O The image stabilizer cannot be turned off when the program selector is set to
EASY.
O The image stabilizer is designed to compensate a normal degree of camcorder
shake.
O The image stabilizer might not be as effective when using the night modes.
a de
The demonstration mode displays the camcorder's main features. It starts automatically
when you leave the camcorder turned on without loading a recording media for more than
5 minutes. However, you can set the camcorder not to start the demonstration mode.
MENU DISPLAY SETUP/_
([_
38)
DEMO MODE .... ON
J
Open the menu and select [DISPLAY SETUP/_ ]. Select [DEMO MODE],
set it to [OFF] and close the menu.
To cancel the demo mode once it has begun, press any button, turn off the
camcorder or load a recording media.
78