Table of Contents
Advertisement
!
1. Open
the
menu
and
select
[D.EFFECT
SETUP].
2. Select
[D.E.SELECT]
and
set
it to [MULTI-S].
3. Select
[M.S.SPEED]
and
select
the
transition
speed.
Following
transition
speeds
can be selected:
fast (every 4
frames),
moderate
(every
6 frames*),
slow (every
8 frames*).
* In Low Light mode:
moderate
(every 8 frames),
slow (every
12 frames).
4. Select
[M.S.SPLIT],
select
the
number
of sequences
and
close
the
menu.
"MULTI-S"
flashes.
5. Press
the
D.EFFECTS
button.
D.EFFECTS
, MANUAL:
Images
will be captured
each time you press the
D.EFFECTS
button. The blue frame
indicating the next
sequence
disappears
after the last image. Pressing
the
D.EFFECTS
button for more than 1 second
cancels
the
images
one after another.
, FAST, MODERATE,
SLOW:
The set number
of images
will be captured
at the set
speed. To cancel
the multi-image
screen,
press the D.EFFECTS
button.
6. Press
the
start/stop
button
to begin
recording.
The multi-image
screen
is recorded
on the tape.
O Turn off the digital
effect when you do not use it.
O The camcorder
retains the setting
even if you turn it off or change
the program
AE mode.
O The image quality
may be slightly
lower with digital effects.
O Digital
effects
cannot
be used in the following
cases:
- When the program
selector
is set to EASY.
- During
DV dubbing.
O Faders
cannot be used when Card Mix is activated.
About
the multi-image
screen:
O The multi-image
screen
cannot be used in the following
cases:
- In the night modes.
- When the widescreen
mode is selected.
- When
Card Mix is activated.
O In PLAY (VCR) mode:
Pressing
any tape operation
button (such
as play or
pause),
or performing
date search
cancels
the multi-image
screen.
_=
==
¢n
67
Advertisement
Table of Contents
