Table of Contents
Advertisement
5. Press the AUDIO
DUB. button
on the wireJess
controller.
"AUDIO DUB." and "_
||" appear.
6. Press the PAUSE |m button
on the wireless
controller
to begin
dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP [] button
on the wireless
controller
to stop
dubbing.
Audio device: Stop playback.
O Use only tapes
recorded
in SP mode 12-bit audio sound
with this camcorder.
Audio
dubbing
will stop if the tape has a blank section
or a section
recorded
in
LP mode or 16-bit mode.
O _
When
using the built-in
microphone,
do not connect
any
devices
to the MIC terminal.
O You cannot
use the DV terminal
for audio
dubbing.
O If you add sound to a tape not recorded
with this camcorder,
sound
quality may
decrease.
O Sound
quality
may decrease
when you add sound to the same scene for more
than 3 times.
O You can check
the picture on the LCD screen.
O When
you connect
an audio device,
check
the sound
via built-in speaker
or
audio
device.
O When
you use a microphone,
you can check the picture on a TV connected
via
the AV terminal
and the sound via headphones
connected
to the TV.
O Set the zero set memory
at the end of the scene you wish to dub audio.
The
camcorder
will automatically
stop audio
dubbing
at that point.
86
Advertisement
Table of Contents
