Canon LU A 8S Instruction Manual page 149

Memory Card Operation
Problem Cause
Memory card cannot be Memory card was not facing
inserted, the correct direction.
Memory card cannot be Memory card is full.
recorded.
Memory card cannot be
played back.
Image cannot be erased.
Memory card is not formatted.
Memory card is not inserted.
File number reached
maximum value,
SD Memory Card is
protected.
Camcorder is not set to
CARD PLAY mode.
Memory card is not inserted.
Image is protected.
SD memory card is protected.
Solution
Turn the memory card over
and reinsert it.
Replace the memory card or
erase images.
Format the memory card.
Insert a memory card.
Set [FILE NOS.] to [RESET]
in the menu and insert a new
memory card.
Change the position of the
protect switch.
Set the camcorder to CARD
PLAY mode.
Insert a memory card.
Cancel the protection.
Change the position of the
protect switch.
Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
[23
89
89
116
89
92
89
108
89
110
89
116
"_ "flashes red. Card error occurred.
Printing
Problem Cause Solution
The printer is not operating The camcorder is set to 1. Set the camcorder to -
even though camcorder and NETWORK mode. CARD PLAY mode.
printer are correctly 2. Disconnect and reconnect
connected, the USB cable.
3. Turn off the printer and turn
it back on.
1o
=s=_
149