Moving the projection lens to the home position
Operate in following procedure to move the projection lens to the home position.
When operating from the main menu
1)
Press the <MENU> button.
f The [MAIN MENU] screen is displayed.
2)
Press as to select [PROJECTOR SETUP].
3)
Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
4)
Press as to select [LENS].
5)
Press the <ENTER> button.
f The [LENS] screen is displayed.
6)
Press as to select [LENS HOME POSITION].
7)
Press the <ENTER> button.
f The confirmation screen is displayed.
8)
Press qw to select [OK], and press the <ENTER> button.
f The projection lens is moved to the home position.
Note
f [PROGRESS] is displayed in the menu while the projection lens is moved to the home position.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f The home position does not match with the optical image center position.
When operating from the lens shift adjustment screen
1)
Press the <DEFAULT> button on the remote control while displaying the lens shift adjustment screen.
f The confirmation screen is displayed.
2)
Press qw to select [OK], and press the <ENTER> button.
f The projection lens is moved to the home position.
Note
f [PROGRESS] is displayed in the menu while the projection lens is moved to the home position.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f The home position does not match with the optical image center position.
f You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for at least three seconds.
70 - ENGLISH
Chapter 3 Basic Operations — Projecting