Troubleshooting
Symptom
Cannot operate using
the controller
The unit turns in the
opposite direction to the
one operated
50
(continued)
Cause and remedial action
● Is the unit connected to the controller properly?
Refer to the Operating Instructions of the controller.
● The user authorization must be set to OFF when the AW-RP50,
AW-RP120, and AK-HRP200 remote camera controllers are
connected in a network.
● Are all the cameras in the daisy-chain connection turned on?
● It may be necessary to upgrade the version of the controller so
that the controller will support the unit.
● Has the stand-alone (Desktop) installation setting been selected
correctly?
● The reversal setting may have been established at the controller if
the unit is connected to the controller.
Refer to the Operating Instructions of the controller.
Reference
pages
P.19 to 24
<Operations and
Settings>
P.88
P.20
P.36
<Operations and
Settings>
P.46, P.84
–––