Panasonic AW-HN40HKPJ Operating Instructions Manual page 13

How to install and connect the unit
When installing the unit on a wall (installation example)
1
Before proceeding, fashion an L-shaped mounting fixture, and attach the fixture securely to the wall
where the unit will be installed.
IMPORTANT
● Before installing the unit, check that the surface of the wall where the unit will be installed is strong enough to
bear not only the total weight (approx. 2.0 kg [4.41 lb]) of the camera once it has been installed but also the
weight of the L-shaped mounting fixture and its supports.
● Use supports that are strong enough to withstand the total weight of the camera once it has been installed and
any vibration or other forces to secure the L-shaped mounting fixture.
If the supports are not capable of bearing this weight and forces, the unit may become detached from the
installation surface or it may fall off, possibly causing injury.
2
1 3
Refer to steps to
AW-HN38.
Support
in "When installing the unit on a ceiling" (page 12), and install the AW-HN40/
(continued)
L-shaped
mounting fixture
AW-HN40/AW-HN38
13