Basic Connections - Fortinet FEX-511F Quick Start Manual

Basic Connections

1
LAN/PoE
Optional Power
1. Insert one end of an Ethernet cable into the LAN 4/PoE PD port on the device.
2. Insert the other end of the Ethernet cable into the PoE LAN port of your FortiGate
appliance, or to a WAN port of your FortiGate through a power injector. Ensure that the
FortiGate interface provides DHCP server service to issue an IP address to FortiExtender
when connected to LAN Port 4 of FortiExtender.
3. Optionally, if you are not using PoE, connect the device to a power outlet using a
power adapter.
Warning:
You must provide adequate grounding to the PoE injector of the FortiExtender unit, if
required, in compliance with your local electrical code or regulations.
This device complies with IEEE 802.3af/at PoE specification. Do not use a PoE
injector that is not IEEE 802.3af/at compliant as it might damage your device.
FortiExtender-511F-QuickStart.indd 13 FortiExtender-511F-QuickStart.indd 13
Connection
Internet
13
7/22/2021 6:21:40 PM 7/22/2021 6:21:40 PM