Enabling Beacon Tou - Generac Power Systems PWRcell XVT076A03 Installation And Owner's Manual

Table 6-3. Time Zone Codes
Time Zone
UTC
US / Eastern
US / Central
US / Mountain
US / Pacific
US / Alaska
US / Hawaii
US / Arizona
US / Puerto Rico
8. See Figure 6-14. To commit changes to all entries,
highlight Save and press the center button.
Access Code:
TOU Schedule:
Time Zone:
Cancel
Figure 6-14. Configuring TOU Schedule (4 of 4)
See Figure 6-15 and Figure
LCD will alternate between a TOU Scheduler Running
Screen and a Current System Mode screen. Both
screens will display the time until the next system change
and the mode the system will change to. The TOU
Schedule name will be listed at the bottom of the device
page.
REbus Beacon
TOU Scheduler
running
Next Change:
To:
Schedule:
Figure 6-15. Running.
Installation and Owner's Manual for Generac PWRCell Inverter
Units
0
1
2
3
4
5
6
7
8
57
1
4
Save
010112
6-16. When enabled, the
1h:37m
Self Supply
SDGE
010113
REbus Beacon
TOU Scheduler
Priority Backup
Next Change:
To:
Schedule:
Figure 6-16. Current System Mode.
See and
Figure 6-17 Figure
the text above the power flow diagram will alternate
between Scheduler Active and the current system mode.
Figure 6-17. Scheduler Active
Figure 6-18. Current System Mode

Enabling Beacon TOU

Once the TOU Schedule is set, the scheduler will auto-
matically enable itself and begin running. However, if the
scheduler becomes disabled for any reason, follow the
instructions below to re-enable the scheduler:
1. See
Figure 6-19. Navigate to the Beacon device
page and press the center button to enter the
device menu.
Commissioning
1h:37m
Self Supply
SDGE
010114
6-18. On the home page,
010115
010116
35