Generac Power Systems PWRcell XVT076A03 Installation And Owner's Manual page 49

System Mode
SA
Self Supply
GRd. Settings
SElibrate CTs
Cancel
CLEPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Figure 7-6. Selecting System Modes (2 of 2)
6. Enable REbus devices beginning with the inverter.
7. See 7-7. From the home page on the
Figure
inverter control panel, use the right arrow key to
navigate to the inverter device page.
8. See
Figure 7-8. Press the center button to access
the inverter device main menu.
9. See 7-9. Select "Enable" and 'Confirm' to
Table
enable the inverter.
PWRcell 2P Inv.
Inverter
Disabled
AC Power:
AC Voltage:
E-total:
Figure 7-7. Enabling Inverter (1 of 3)
PWRcell 2P Inv.
Enable
Mod. Settings
Calibrate CTs
RCPn: 000100073212
< EXIT SCROLL > NEXT • SELECT
Figure 7-8. Enabling Inverter (2 of 3)
Installation and Owner's Manual for Generac PWRCell Inverter
Menu
Confirm
011139
-02
0W
248V
2.4Wh
010010
Menu
010011
PWRcell 2P Inv
Enable
Enable
Mod. Settings
Calibrate CTs
Cancel
RCPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Figure 7-9. Enabling Inverter (3 of 3)
10. Once the inverter is enabled and in state, "grid con-
nected," scroll right and enable each PV Link and
PWRcell Battery, repeating the process just per-
formed for the inverter. See
11, and 7-12. Also see Section 6:
Figure
sioning Enable REbus Devices
tion.
Figure 7-10. Enabling REbus Devices (1 of 3)
PV Link S2502
Enable
Mod. Settings
Enable w/PVRSS
RCPn: 000100073212
< EXIT SCROLL > NEXT • SELECT
Figure 7-11. Enabling REbus Devices (2 of 3)
System Operation
Menu
Confirm
010012
Figure 7-10, Figure 7-
Commis-
for more informa-
013444
Menu
013443
45