Table of Contents
Advertisement
L. Chuck Guard .............................................. 1
M. Chuck Guard Mounting Arm ....................... 1
N. Swing-Away Bed Extension ....................... 1
O. Chisel Pan ................................................. 1
P.
Chisel Pan Mounting Rod ......................... 1
—Lock Nuts M12-1.75 ................................ 2
—Hex Nuts M12-1.75 .................................. 2
—Flat Washers 12mm ................................ 4
L
M
Figure 11. Accessory components.
Model G0799 G0800 (Mfd. Since 11/17)
O
N
P
Q. Hardware (see Hardware Recognition Chart)
—Cap Screws M12-1.75 x 20 ..................... 2
—Cap Screws M12-1.75 x 35 ..................... 8
—Cap Screws M10-1.5 x 30 ....................... 2
—Flat Washers 12mm ................................ 2
—Flat Washers 10mm ................................ 2
—Lock Washers 12mm .............................. 2
—Lock Washers 10mm .............................. 2
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
-19-
Advertisement
Table of Contents
