Download Print this page

Dometic DMA4061 Operating Manual page 10

Advertisement

Refrigerator
4.5 Using the ice maker (if equipped)
I
Read before proceeding:
• The first few cycles may produce small ice cubes due to air trapped in the water lines.
• If ice cubes remain too small or stick together, refer to "Adjusting the ice cube size" on page 10.
➤ Discard the first container of ice cubes if the water system has been winterized or out of use for several weeks.
Turning the ice maker on and off
6
➤ Ensure that the refrigerator is connected to 120
VAC.
➤ Open the valve supplying water to the refrigerator.
➤ Keep the bale arm in the up (OFF) position until
water enters the ice maker.
➤ Set the bale arm in the down (ON) position once
there is ice in the ice maker.
➤ Raise the bale arm to the up (OFF) position about
1-1/2 hours before traveling, to allow the water in
the mold assembly to freeze and prevent water
from splashing out of the mold assembly.
I
The ice maker will automatically fill the mold
assembly and eject the ice cubes into the
storage bin until it is full.
EN
Adjusting the ice cube size
7
Adjusting
Ice Level
Screw
Bale Arm
Cover
I
Read before proceeding:
• The water supply system must have a minimum
pressure of 15 pounds-per-square-inch gauge
(psig).
• A 1/4" diameter water line to the water valve must
be used at the rear of the refrigerator.
• The water line must have a manual shutoff valve in
an easily accessible location.
• The maximum water level is represented by a thin
line on the mold assembly. Do not allow the water
level to exceed this line.
➤ Remove the protective cover from the ice maker by
inserting a flat-bladed screwdriver into the slot and
gently twisting the screwdriver.
➤ Adjust the ice cube size by turning the adjusting
screw counterclockwise to increase the size of the
ice cubes, and clockwise to decrease the size of
the ice cubes.
I
Do not turn the adjustment screw more than
one revolution at a time.
➤ Place the protective cover back on the ice maker.
➤ Allow the ice maker to cycle several times before
making further adjustments.
10

Hide quick links:

Advertisement

loading