Charger Race Day Damper Installation - SRAM ROCKSHOX RUDY XPLR Service Manual

2 0 0 H o u r S e r v i c e
1
Install the Charger Race Day Damper into the damper side upper tube. Install the Charger Race Day Damper into the damper side upper tube.
2 Install the top cap and tighten. Install the top cap and tighten.
3 Ultimate: Install the adjuster knob with the tab in the 11 o'clock, Ultimate : Install the adjuster knob with the tab in the 11 o'clock,
unlocked position, then tighten the retaining screw. Check the adjuster unlocked position, then tighten the retaining screw. Check the adjuster
knob to verify it rotates into the "Locked" position. knob to verify it rotates into the "Locked" position.
Base: Thread on the damper cap. Base : Thread on the damper cap.
200 Hour Service Continue the 200 Hour Service with 200 Hour Service Continue the 200 Hour Service with Lower Leg Installation
C h a r g e r R a c e D a y D a m p e r I n s t a l l a t i o n
Lower Leg Installation.
Top Cap/Cassette Tool
Ultimate
.

Charger Race Day Damper Installation

28 N·m (250 in-lb)
2 mm 0.4 N·m (3 in-lb)
Base
30