Rs-232 Command - ATEN KE6900ST User Manual

KVM over IP Matrix System User Manual

RS-232 Command

The RS-232 command allows you to set the RS-232 settings for a device.
The formula for the RS-232 command is as follows:
Command + Address + Number + Baud Rate + Parity + Data Bit +
Stop Bit + Flow Control [Enter]
1. For example, to set device (192.168.0.33) with a baud rate of 38400, parity
of none, data bit of 8, and stop bit of 1, type the following:
baud a192.168.0.33 38400 none 8 1 [Enter]
2. For example, to set the local device with a baud rate of 19200, type the
following:
baud 19200 [Enter]
The following tables show the possible values for the RS-232 command:
Command
Address
Baud Rate
115200
Data Bit
248
baud RS-232 command
a Address command
Num1
xx Address number
xx: Device ID or IP address
9600 Use 9600 baud rate
19200 Use 19200 baud rate
38400 Use 38400 baud rate
Use 115200 baud rate
Parity
None Sets the parity to none
Even Sets the parity to even
Odd Sets the parity to odd
5 Sets the data bit to 5
6 Sets the data bit to 6
Description
Description
Description
Description
Description
Description