Array Mode - ATEN KE6900ST User Manual

KVM over IP Matrix System User Manual

Array Mode

In Array Mode the screen is divided into a grid of panels, with each panel
showing the video display of a particular Channel. Right-click a panel and
select a mode to connect: E: Exclusive, O: Occupy, S: Share, V: View Only,
X: Exit. While the mouse cursor hovers over a panel displaying video, if audio
is being sent from that Transmitter, it can be heard at the Receiver.
No. Item
1 Next Arrow
2 Previous Arrow
3 Grid Selection
4 Favorites
124
Description
Use these two buttons to navigate to the next page
or to the end of the list if there are more Channels
available than can be seen on the page.
Use these two buttons to navigate to the previous
page or to the beginning of the list if there are more
Channels available than can be seen on the page.
Select a range for how many Channels you want to
display. Options are: 2x2, 3x3, 4x4, 5x5, and 6x6.
Click Favorites to list only the Channels marked as
favorites. Click All to list all Channels.
To add/remove a Favorite, go to List Mode, select a
Channel and then right click with the mouse to select
Add to Favorite or Remove from Favorite.