Fax Only Mode - Canon PIXMA MX870 Series Getting Started

7
Read this section only when
using the machine as a fax.
If not using the machine as a
fax, go to "8 Select Connection
Method" on page 21.
1
The following four modes are available for receiving faxes. Select a receive mode according
to your needs. You can change the receive mode any time. Refer to the on-screen manual:
Basic Guide.
Intended Use
• Want to use a telephone line
for voice calls and faxes.
• Want to prioritize voice
call reception over fax call
reception because there are
more opportunities to receive
voice calls.
• Want to use a telephone line
for voice calls and faxes.
• Want to prioritize fax call
reception over voice call
reception because there are
more opportunities to receive
faxes.
• Want to use a dedicated fax
line.
Want to use as a fax only.
•
• If you use Distinctive Ring
Pattern Detection (DRPD)
service
Receive Mode
TEL priority mode
Voice calls cannot be received unless a
telephone is connected.
FAX priority mode

FAX only mode

DRPD