Canon PIXMA MX870 Series Getting Started page 38

Read this section only when setting up
a wireless connection by using the WCN
(Windows Connect Now) function of
Windows 7/Windows Vista.
If not using WCN, the following procedure is
not necessary.
Proceed with the setup according to your
operating system.
Windows
Vista
Windows 7
• Before setting up by using the WCN,
establish wireless communication between
the computer and the access point.
• Canon assumes no responsibility for any
damage or loss of data stored on your
USB flash drive regardless of the cause
even within the warranty period.
• If your USB flash drive cannot be attached
to the Direct Print Port of the machine, a
commercial extension cord (for USB flash
drives) may be required.
• Operation may not be guaranteed
depending on your USB flash drive.
• USB flash drives with security enabled
may not be used.
• The machine supports "WCN-UFD".

10 Wireless Setup
-
1 1
1
Go to - .
Go to - on
page 38.
From the Start
menu of the
Windows side, click
Network.
The Network folder
opens.
Windows Vista
A
Windows 7
2
Click Add a wireless
device on the menu.
The Add a wireless
device to the network
screen will be displayed.
- (P.38)
3
Click I want to add a wireless
device or computer that is not on
the list, using a USB flash drive.