Receiving Faxes Automatically: Fax Only Mode; Setting Fax Only Mode - Canon LASER CLASS 1060P User Manual

Receiving Faxes Automatically: FAX ONLY MODE

If you have a separate telephone line for fax use only, connect your unit to this line and
set FAX ONLY MODE. Your unit will answer all calls as fax calls.

Setting FAX ONLY MODE

Follow this procedure to set the receive mode to FAX ONLY MODE:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
Use ∂ or ¨ to select RX SETTINGS.
4
5
Press Set.
6 Use ∂ or ¨ to select RX MODE.
7
Press Set.
8 Use ∂ or ¨ to select FAX ONLY
MODE.
9
Press Set.
10
Press Stop to return to standby mode.
11
Confirm that FaxOnly is displayed in
the LCD.
• If FaxOnly is not displayed, press Receive
Mode repeatedly until FAX ONLY MODE
is displayed. After a few seconds, the
LCD returns to standby mode.
The unit treats all incoming calls as fax calls. It receives faxes automatically and
disconnects any voice calls.
n
The unit does not ring when it receives a fax call. If you want to be alerted when a fax call
is received, connect the optional handset or a telephone to the unit, and enable the
INCOMING RING setting (1 p. 14-7). You can also select the number of rings before the
unit answers (1 RING COUNT, p. 14-7).
8-8
Receiving Faxes
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Ex:
12/27 FaxOnly
Ex:
12/27 FaxOnly
Chapter 8