Napoleon LV50N2 Installation And Operating Instructions Manual page 30

30
METAL STUDS MAY BE REQUIRED TO ENSURE CLEARANCE TO COMBUSTIBLES.
EN
EN
IMPORTANT: Before fi nishing in the appliance test the operation using the remote control, cycling it
through all of its different modes, see "OPERATION" section. Should trouble shooting be required,
access to the controls can be made through the pre-fi nishing access panel.
See section "VENTING" for vent clearances.
75 1/4"
191.1cm
MINIMUM
NOTE:
• Power vent system available with reduced vent pipe clearances. Contact your authorized
dealer/distributor for more information.
W415-1624 / D / 11.22.16
50 3/8"
128cm
MINIMUM
65 3/4"
167cm
WARNING
!
NOTE: TOP HEADERS AND REAR SIDE FRAMING
MUST BE INSTALLED AFTER FIREPLACE
HAS BEEN POSITIONED.
CLEARANCES TO COMBUSTIBLE FRAMING
MINIMUM OF 1". WHERE NOT POSSIBLE
16 3/16"
41.1cm
AND SIDES OF VENTING MUST BE A
METALS STUDS ARE REQUIRED.