Table of Contents
Advertisement
Change the remote
access PIN code (for
D146)
Note
•
The default answering machine remote
access PIN code is 0000 and it is important
to change it to ensure the security.
1
Press
/
or MENU/OK > [ANSW
MACHINE] > MENU/OK.
2
Select [REMOTE ACC.] > [CHANGE
PIN], then press MENU/OK to
confirm.
3
Enter the old PIN/passcode, then
press MENU/OK to confirm.
4
Enter the new PIN/passcode, then
press MENU/OK to confirm.
5
Enter the new PIN/passcode again,
then press MENU/OK to confirm.
» The setting is saved.
Charge the handset
Place the handset on the base station
or the charging cradle to charge the
handset. When the handset is placed
correctly on the base station, you hear
a docking sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first
use.
•
If the handset becomes warm when the
batteries are being charged, it is normal.
You can activate or deactivate the
docking tone.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current
battery level.
When the handset is off the
base station/charger, the
bars indicate the battery
level (full, medium and
low).
When the handset is on the
base station/charger, the
bars flash until charging is
complete.
The empty battery icon
flashes. The battery is low
and needs recharging.
The handset turns off if the batteries
are empty. If you are on the phone,
you hear warning tones when the
batteries are almost empty. The call
gets disconnected after the warning.
What is standby mode?
Your phone is in standby mode when
it is idle. The handset name (or date
and time) is displayed on the standby
screen.
EN
9
Advertisement
Table of Contents
