Adjust The Earpiece/Speaker Volume; Mute The Microphone; Turn The Speaker On Or Off; Make A Second Call - Philips D146 Extended User Documentation

Adjust the
earpiece/speaker
volume
Press /
during a call.
» The earpiece/speaker volume is
adjusted and the phone is back
to the call screen.

Mute the microphone

1
Press during a call.
» [MUTE ON] is displayed on the
handset.
» The caller cannot hear you, but
you can still hear his voice.
2
Press again to unmute the
microphone.
» You can now communicate with
the caller.
Turn the speaker on or
off
Press .

Make a second call

Note
•
This service is network dependent. Check
with your network provider for operation.
1
Press during a call.
» The first call is put on hold.
2
Dial the second number.
» The number displayed on the
screen is dialed out.
to adjust the volume

Answer a second call

Note
•
This service is network dependent.
When there is a periodical beep to
notify you of an incoming call, you can
answer the call in these ways:
1
Press and
» The first call is put on hold, and
you are now connected to the
second call.
2
and 1 to end the current
Press
call and answer the first call.
Switch between two
calls
Note
•
This service is network dependent. Check
with your network provider for operation.
Press and .
» The current call is put on hold,
and you are now connected to
the other.
Make a conference call
with the external callers
Note
•
This service is network and country
dependent. Check with the service provider
for operation and additional charges.
When you are connected to two calls,
press , then .
» The two calls are combined
and a conference call is
established.
to answer the call.
EN
13