Setting the IP address
In order for the user to use the functions of the ACP via the web, the unique IP address should be
given to the ACP. Set the IP address as follows:
1.
Press the 'MENU/SELECT' button of the ACP. [MENU] screen is displayed as shown at below.
Press the 'MENU/SELECT' button again. The screen to enter the IP address is displayed.
MENU/
MENU/
SELECT
SELECT
2.
Use Up/Down/Left/Right (▲,▼,◀,▶) button to enter the desired IP address.
MENU/
MENU/
SELECT
SELECT
3.
After entering the IP address, press the 'MENU/SELECT' button to set the entered IP address. But,
there is no 'MENU/SELECT' button pressed for a specific period (about 5 seconds), it returns to the
initial screen with the entered IP address not applied to the system, and the existing set IP address
is used.
MENU/
MENU/
SELECT
SELECT
Click
Click
MENU
MENU
/SELECT
/SELECT
button
button
Installation/Owner's Manual
2. Installing ACP
[MENU] fi
[MENU] fi
Set IP Address
Set IP Address
[Set IP Address]
[Set IP Address]
192.168.000.000
192.168.000.000
[Set IP Address]
[Set IP Address]
192.168.002.101
192.168.002.101
Example to set IP address
Example to set IP address
ACP
ACP
SW ver. 2.77.2
SW ver. 2.77.2
2-29