LG PQCPA11A0E Installation & Owner's Manual page 150

3. ACP operation by using the LG ACCS
1
Group input window
A new group is added or the information of the existing group can be changed or deleted at the Group
input window. Also, the group information and the indoor unit (or ventilator) information can be
conveniently entered by using the default input button.
Group
Default input button
When you click the [Default input] button, the indoor unit information is automatically entered as many
as the number of indoor units to enter based on the previously entered outdoor unit information.
If there are many indoor units to be registered to the group, it can be easier to set the air conditioner
by pressing [Default input] button and then changing or deleting the group name and the indoor unit
information.
3-68
ACP
It displays the list of the air conditioner (or ventilator) group set at
the ACP. When a specific air conditioner group is selected from
the air conditioner group list, the list of the air conditioiner
belonging to the related air conditioner group is displayed at 'Air
conditioner (or ventilator) information input' at the right side.
Click the blank column to add a new group. The related column is
displayed in yellow, at which the group name can be entered.
At this time, the group number is automatically entered, so be
careful.
The existing group may be modified by the same method. Click
the group to modify, and when the related column is changed to
yellow, modify the group name.
In order to delete the group, click the group name to delete, and
when the related column is changed to yellow, delete the group
name.
Caution: Deleting the indoor unit
information
When the group is deleted, all information belonging
to the related group is deleted, so be careful.