LG PQCPA11A0E Installation & Owner's Manual page 12

1. ACP Functions & Specification
7
Reset switch
Switch for resetting the ACP by the software
8
Power switch
Switch for turning on/off the ACP
9
Adaptor connection port
Port for DC 12V to connect the adaptor supplying the power
10
External input signal terminal
Port for connecting the external input signal (20EA in total). Input terminal not requiring the
power.
11
External output signal terminal
Connection port spare for the function extension of the ACP (4EA in total)
Note: External input/output signal terminal
9 external input signal terminal and 10 external output signal terminal are configured at the
PQCPB11A0E only. These terminals are used to connect the AC Manager to set the fire control
function. These terminal are used to set the indoor unit to operate or stop for responding High or Low
signal of each external input signal.
In case of PQCPA11A0E model, a separate IO Kit (Model: PQCPE11A0E) can be purchased and
installed to use for connecting the external signal.
1-5
ACP