Chapter 4. Removing Of Major Parts Removing Of Major Parts (Lc-60Le600U) - Sharp LC-60LE600U Service Manual

CHAPTER 4.
LC-60LE600U REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (LC-60LE600U)
1. Removing of Stand Unit and Rear Cabinet.
1. Remove the 4 lock screws
2. Remove the 1 lock screw
3. Disconnect AC wire and detach the AC Cord
4. Remove the 4 VESA Covers
Stand Unit
8
[Precaution when removing the rear cabinet]
If the rear cabinet is removed with the set upright, the speakers may fall; it results in connector disconnection. Therefore, never remove the rear cab-
inet with the set upright.
Be sure to remove the rear cabinet with the screen side down.
Screws for fixing Speaker
and Rear Cabinet
[Precaution when mounting the rear cabinet]
Put the speakers in place with the screen side down, and attach the rear cabinet.
Since the speakers are fixed by the rear cabinet, they cannot be fixed without the rear cabinet.
and detach the Stand Unit .
and detach the AC Cord Cover
.
, 10 lock screws , 2 lock screws
AC Cord Cover
2
Service Manual
.
and 16 lock screws
3
4
5 AC Cord
7
[AC]
1
[AC]
10 Rear Cabinet
4 – 1
and detach the Rear Cabinet
8
VESA Cover
6
9
LC-60/70LE600U
.