Sharp LC-60LE600U Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. Aquos LC-60LE600U
  6. Service manual

Sharp LC-60LE600U Service Manual

Hide thumbs Also See for LC-60LE600U:
Table of Contents

Advertisement

Quick Links

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
MAJOR SERVICE PARTS ..................... . ..........iv
[1]
SPECIFICATIONS ................................. . ....... 1-1
[1]
PARTS NAMES...................................... . ....... 2-1
[2]
OPERATION MANUAL .......................... . ....... 2-2
[1]
DIMENSIONS ........................................ . ....... 3-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
SERVICE MANUAL
LCD COLOR TELEVISION
LC-60LE600U
LC-70LE600U
MODELS
CONTENTS
[1]
(LC-60LE600U) .............................................4-1
[2]
(LC-70LE600U) .............................................4-7
[1]
ADJUSTMENT PROCEDURE ......................5-1
[1]
TROUBLESHOOTING TABLE ......................6-1
[1]
MAJOR IC INFORMATIONS .........................7-1
DIAGRAM
[1]
OVERALL WIRING DIAGRAM ......................8-1
[2]
SYSTEM BLOCK DIAGRAM .........................8-2
LC-60/70LE600U
No. S72X460LE600U
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading

Related Manuals for Sharp LC-60LE600U

Summary of Contents for Sharp LC-60LE600U

  • Page 1: Table Of Contents

    SAFETY PRECAUTION CHAPTER 4. REMOVING OF MAJOR PARTS IMPORTANT SERVICE SAFETY PRE- REMOVING OF MAJOR PARTS CAUTION ............i (LC-60LE600U) ..........4-1 PRECAUTIONS A PRENDRE LORS DE REMOVING OF MAJOR PARTS LA REPARATION ..........ii (LC-70LE600U) ..........4-7 PRECAUTIONS FOR USING LEAD-FREE SOLDER ..........

  • Page 2: Safety Precaution Important Service Safety Pre- Caution

    LC-60/70LE600U LC-60LE600U SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral- leled by a 0.15µF capacitor in series with all exposed metal cabinet...

  • Page 3: Precautions A Prendre Lors De La Reparation

    LC-60/70LE600U PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. • A l'aide de deux fils à pinces, brancher une résistance de 1.5 kΩ AVERTISSEMENT 10 watts en parallèle avec un condensateur de 0.15µF en série N'entreprendre aucune modification de tout circuit.

  • Page 4: Precautions For Using Lead-Free Solder

    LC-60/70LE600U PRECAUTIONS FOR USING LEAD-FREE SOLDER Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example: Indicates lead-free solder of tin, silver and copper.

  • Page 5: Outline

    LC-60/70LE600U LC-60LE600U OUTLINE Service Manual MAJOR SERVICE PARTS PWB Unit Ref No. Parts No. Description DKEYMF905FM04 MAIN Unit DUNTKG015FM01 R/C, OPC Unit DUNTKG014FM01 ICON Unit DUNTKF800FM53 KEY Unit POWER/LED DRIVER Unit (RUNTKB057WJQZ is completely interchangeable with RUNTKA932WJQZ.) RUNTKB057WJQZ (LC-60LE600U) RUNTKA933WJQZ...

  • Page 6: Chapter 1. Specifications Specifications

    LC-60/70LE600U CHAPTER 1. LC-60LE600U SPECIFICATIONS Service Manual [1] SPECIFICATIONS 1 – 1...

  • Page 7: Chapter 2. Operation Manual Parts Names

    LC-60/70LE600U CHAPTER 2. LC-60LE600U OPERATION MANUAL Service Manual [1] PARTS NAMES 2 – 1...

  • Page 8: Operation Manual

    LC-60/70LE600U [2] OPERATION MANUAL 2 – 2...
  • Page 9 LC-60/70LE600U 2 – 3...
  • Page 10 LC-60/70LE600U 2 – 4...
  • Page 11 LC-60/70LE600U 2 – 5...

  • Page 12: Chapter 3. Dimensions Dimensions

    LC-60/70LE600U CHAPTER 3. LC-60LE600U DIMENSIONS Service Manual [1] DIMENSIONS 3 – 1...

  • Page 13: Chapter 4. Removing Of Major Parts Removing Of Major Parts (Lc-60Le600U)

    CHAPTER 4. LC-60LE600U REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS (LC-60LE600U) 1. Removing of Stand Unit and Rear Cabinet. 1. Remove the 4 lock screws and detach the Stand Unit 2. Remove the 1 lock screw and detach the AC Cord Cover 3.
  • Page 14 LC-60/70LE600U [Precautions when fixing the Rear Cabinet] When fixing the Rear Cabinet, be careful not to catch the backlight LED harness, speaker harness and other harnesses in it. • The hooks on the external wall of the Rear Cabinet are fitted in the Front Cabinet Ass’y. After putting the Rear Cabinet in place, fit the hooks securely;...
  • Page 15 LC-60/70LE600U 2. Removing of Speaker (L/R), KEY Unit and Bottom Cover. 1. Detach the Bottom Cover 2. Disconnect the SP wire. 3. Detach the Speaker (L) , Speaker (R) 4. Disconnect the RC wire. 5. Detach the KEY Unit Ass’y 6.
  • Page 16 LC-60/70LE600U 3. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (PD, LW, Cl) 2. Disconnect the following connectors from the POWER/LED DRIVE Unit. (PD, LA) 3. Disconnect the following connectors from the LCD CONTROL Unit. (LW, PL) POWER/LED DRIVE Unit MAIN Unit [LA]...
  • Page 17 LC-60/70LE600U 4. Removing of 60” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/LED DRIVE Unit. 1. Remove the 21 Hooks and detach the 60” LCD Panel Module Unit 2. Remove the 2 FFC , 2 Ferrite Cores and 4 lock screws and detach the LCD CONTROL Unit 3.
  • Page 18 LC-60/70LE600U 5. Removing of R/C OPC Unit, ICON Unit. 1. Detach the R/C OPC Unit 2. Disconnect the RA wire. 3. Detach the ICON Unit 4. Disconnect the CI wire. Front Cabinet Ass'y [CI] [RA] ICON Unit R/C OPC Unit 4 –...

  • Page 19: Removing Of Major Parts (Lc-70Le600U)

    LC-60/70LE600U [2] REMOVING OF MAJOR PARTS (LC-70LE600U) 1. Removing of Rear Cabinet. 1. Remove the 1 lock screw and detach the AC Cord Cover 2. Disconnect AC wire and detach the AC Cord 3. Remove the 4 VESA Covers , 9 lock screws and 19 lock screws and detach the Rear Cabinet .
  • Page 20 LC-60/70LE600U [Precautions for assembly] Push Push Push CAUTION Set it so that there may not be a clearance between Front Cabinet Ass'y and Rear Cabinet Ass'y. Push Push The fingernail is surely fixed when Rear cabinet Ass'y is There is a gap without the fingernail fitting firmly pushed, and the gap disappears.
  • Page 21 LC-60/70LE600U 2. Removing of Speaker (L/R) and KEY Unit. 1. Disconnect the SP wire. 2. Remove the 2 lock screws and detach the Speaker (L) , Speaker (R) 3. Disconnect the RC wire. 4. Detach the KEY Button Cover Ass’y 5.
  • Page 22 LC-60/70LE600U 3. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (PD, LW, Cl) 2. Disconnect the following connectors from the POWER/DRIVER Unit. (PD, LA) 3. Disconnect the following connectors from the LCD CONTROL Unit. (LV, PL) MAIN Unit [PD] [LW]...
  • Page 23 LC-60/70LE600U 4. Removing of 70” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/DRIVER Unit. 1. Remove the 24 Hooks and detach the 70” LCD Panel Module Unit 2. Remove the 2 Connecting Cords , 4 lock screws and detach the LCD CONTROL Unit 3.
  • Page 24 LC-60/70LE600U 5. Removing of R/C OPC Unit, ICON Unit, Wi-Fi Unit. 1. Detach the R/C OPC Unit 2. Disconnect the RA wire. 3. Detach the ICON Unit 4. Disconnect the CI wire. 4 – 12...

  • Page 25: Chapter 5. Adjustment

    LC-60/70LE600U CHAPTER 5. LC-60LE600U ADJUSTMENT Service Manual [1] ADJUSTMENT PROCEDURE The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is required due to part replacement, make an adjustment according to the following procedure.
  • Page 26 LC-60/70LE600U 3. Entering and exiting the adjustment process mode 1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu. 2) While holding down the “VOL (–)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power. The letter “<K>”...
  • Page 27 LC-60/70LE600U Page Line Item Description Remarks RGB ADJ Analog RGB picture level adjustment G OFFSET B OFFSET R OFFSET G GAIN B GAIN R GAIN RESET ADJUSTMENT Reset IN POINT LOW_D Adjustment point1 at Dynamic mode IN POINT HIGH_D Adjustment point2 at Dynamic mode R LEVEL LOW_D WB adjustment Point 1, R adjustment value at Dynamic mode G LEVEL LOW_D...
  • Page 28 [Adjustment position] 7.2. Image adjustment 7.2.1 Device check Before adjustment, check that the adjustment jig and signal source are set for Sharp LCD US. Signal generator level adjustment check (Adjust to the standard value level.) • 15K component signal: Y level: 0.714Vp-p±...
  • Page 29 LC-60/70LE600U 7.2.3 Component 15K signal adjustment Adjustment point Adjustment conditions Adjustment procedure Setting 480i signal • Send the 100% color bar signal to the component input. 100% Full Field Color Bar Color saturation: 100% 480i 100% color bar 100% white 0% black Automatic adjustment exe- Point the cursor to [COMP SD ADJ] and press the [Enter] key.
  • Page 30 LC-60/70LE600U 8. White balance adjustment 8.1. White balance adjustment Adjustment point Adjustment conditions Adjustment procedure Setting 1) Set the unit to the following conditions. AV MODE: [DYNAMIC] Backlight: +16 Active Contrast: OFF Aging Time: Min. 60 minutes 2) Connect the unit with the white balance adjustment jig. Automatic adjustment [Command] [Adjustment procedure]...
  • Page 31 LC-60/70LE600U Adjustment point Adjustment conditions Adjustment procedure [Adjustment value] * According to the “Standard settings” submitted by the Technical Department [LC-60LE600U] teaching set [Adjustment standard value] Measuring instrument: [Minolta CA-210] Technical measuring instrument Level Reference value Adjustment spec Inspection spec X=0.272...
  • Page 32 LC-60/70LE600U 10. Factory setting After completing the factory setting, pull out the AC cord to complete the setting. CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again. Adjustment point Adjustment conditions Adjustment procedure...

  • Page 33: Chapter 6. Troubleshooting Table

    LC-60/70LE600U CHAPTER 6. LC-60LE600U TROUBLESHOOTING TABLE Service Manual [1] TROUBLESHOOTING TABLE No video (1) COMPOSITE: No external input video [VIDEO] Is VIDEO selected on the input select menu screen? Select VIDEO on the input select menu screen for the right input signal.
  • Page 34 LC-60/70LE600U No video (2) COMPONENT: No external input video [COMPONENT] Is COMPONENT selected on the input select menu screen? Select COMPONENT on the input select menu screen for the right input signal. Does the COMPONENT Y2_PLUG detection function? Check the line between pin (7) of input terminal (J502) and ter- minal on IC3301 side of R502.
  • Page 35 LC-60/70LE600U No video (3) No video at UHF/VHF broadcast signal reception No video at digital broadcast signal reception Is the specified TV signal selected on the input select menu screen? Is there the analog video signal output (CVBS) at pin (9) of tuner Are there the video signal outputs (DIF-/+) at pins (10) and (11) of (TU1101)? tuner (TU1101)?
  • Page 36 LC-60/70LE600U <HDMI input> No video (5)-1 HDMI: No external input video [HDMI1] HDMI: No external input video [HDMI2] Is HDMI1 selected on the input select menu screen? Is HDMI2 selected on the input select menu screen? Select HDMI1 on the input select menu screen for the Select HDMI2 on the input select menu screen for the right right input signal.
  • Page 37 LC-60/70LE600U <HDMI input> No video (5)-2 HDMI: No external input video [HDMI3] Is HDMI3 selected on the input select menu screen? Select HDMI3 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Does the DDC5V signal come from pin (16) of SC1502 to the terminal on IC3301 side of Q1509? Check the line between the input terminals of SC1502 and IC3301.
  • Page 38 LC-60/70LE600U No audio (1) VIDEO No audio COMPONENT No audio Is VIDEO selected on the input select menu screen? Is COMPONENT selected on the input select menu screen? Refer to “: No external input video [VIDEO]”. Refer to “: No external input video [COMPONENT]”. Is the audio output selected for “VARIABLE”...
  • Page 39 LC-60/70LE600U No audio (2) [PC analog audio input] PC IN No audio [HDMI analog audio input] HDMI1 No audio Is PC IN selected on the input select menu screen? Is HDMI1 selected on the input select menu screen? Refer to “: No external input video [PC IN]”. Refer to “: No external input video [HDMI1]”.
  • Page 40 LC-60/70LE600U No audio (3) No audio at UHF/VHF broadcast signal reception No audio at digital broadcast signal reception Is TV selected on the input select menu screen? Is TV selected on the input select menu screen? Refer to “No video at UHF/VHF broadcast signal Refer to “No video at digital broadcast signal reception”.
  • Page 41 LC-60/70LE600U No audio (4) HDMI1 No audio (HDMI connected) HDMI2 No audio (HDMI connected) HDMI3 No audio (HDMI connected) [HDMI1] Is HDMI1 selected on the input select menu screen? [HDMI2] Is HDMI2 selected on the input select menu screen? [HDMI3] Is HDMI3 selected on the input select menu screen? Refer to “: No external input video [HDMI1/2/3]”.
  • Page 42 LC-60/70LE600U No audio signal at Digital Audio Output terminal (Analog sound heard) No HDMI1/2/3 audio No audio at digital broadcast signal reception If no video appears, refer to “No external input video (HDMI) If no video appears, refer to “No video at digital broadcast signal reception”. [HDMI1/2/3]”.
  • Page 43 LC-60/70LE600U LED flashing timing chart for error notification. 400ms 1600ms 1) Center Icon illumination Error type Center Icon illumination operation (1 cycle) Pins are microprocessor pins. Lamp error [Center Icon illumination] Judged by the ERR_PNL port. Confirmed after 10 consecutive Flashes once: Fast detections at 500 ms intervals (detected only when the backlight is H: On...

  • Page 44: Chapter 7. Major Ic Informations

    LC-60LE600U CHAPTER 7. LC-60LE600U MAJOR IC INFORMATIONS Service Manual [1] MAJOR IC INFORMATIONS 1. MAJOR IC INFORMATIONS 1.1. IC3301 (RH-IXD253WJQZQ) This LSI is FULL HIGH-DEFINITION 1080P DIGITAL TV SYSTEM-ON-A-CHIP. It combines a transport de-multiplexer, a high definition video decoder, an AC3 audio decoder, a dual-link LVDS transmitter, and a NTSC/PAL/ SECAM TV decoder with a 3D comb filter (NTSC/PAL).

  • Page 45: Chapter 8. Overall Wiring/System Block

    LC-60/70LE600U LC-60LE600U CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK DIAGRAM Service Manual [1] OVERALL WIRING DIAGRAM 8 – 1...

  • Page 46: System Block Diagram

    LC-60/70LE600U [2] SYSTEM BLOCK DIAGRAM 8 – 2...

  • Page 47: Parts Guide

    No. S72X460LE600U LCD COLOR TELEVISION LC-60LE600U LC-70LE600U MODELS CONTENTS PRINTED WIRING BOARD SUPPLIED ACCESSORIES/ ASSEMBLIES PACKING PARTS (LC-60LE600U) LCD PANEL MODULE UNIT SUPPLIED ACCESSORIES/ PACKING PARTS (LC-70LE600U) CABINET AND MECHANICAL PARTS (LC-60LE600U) SERVICE JIG (USE FOR SERVICING) CABINET AND MECHANICAL PARTS (LC-70LE600U) Parts marked with "...
  • Page 48 R/C OPC Unit DUNTKG015FM01 POWER/LED DRIVE Unit (RUNTKB057WJQZ is completely interchangeable with RUNTKB057WJQZ RUNTKA932WJQZ.) (LC-60LE600U) POWER/DRIVER Unit (LC-70LE600U) RUNTKA933WJQZ [2] LCD PANEL MODULE UNIT 60" LCD PANEL MODULE Unit (LK600D3GV0BZ) (LC-60LE600U) R1LK600D3GV0BZ 70" LCD PANEL MODULE Unit (LK695D3GW8BD) (LC-70LE600U) R1LK695D3GW8BD...
  • Page 49 LC-60/70LE600U [3] CABINET AND MECHANICAL PARTS (LC-60LE600U) 60"LCD Panel Module Unit R/C OPC Unit ICON Unit KEY Unit 1-4 1-5 MAIN Unit POWER/LED DRIVE Unit LCD CONTROL Unit...
  • Page 50 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] CABINET AND MECHANICAL PARTS (LC-60LE600U) Front Cabinet Ass'y CCABAC860WJ35 Front Cabinet Not Available Center ICON Cover Not Available R/C LED Decoration Not Available WireHolder LHLDWA124WJKZ WireHolder, x4 LHLDWA175WJUZ WireHolder LHLDWA289WJKZ ICON DIF.
  • Page 51 LC-60/70LE600U [4] CABINET AND MECHANICAL PARTS (LC-70LE600U) 70"LCD Panel Module Unit R/C OPC Unit ICON Unit KEY Unit MAIN Unit POWER/DRIVE Unit LCD CONTROL Unit...
  • Page 52 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] CABINET AND MECHANICAL PARTS (LC-70LE600U) Front Cabinet Ass'y CCABAC859WJ35 Front Cabinet Not Available ICON Cover Not Available R/C LED Decoration Not Available Wire Holder, x2 LHLDWA124WJKZ Wire Holder, x4 LHLDWA175WJUZ Wire Holder LHLDWA289WJKZ Sheet...
  • Page 53 LC-60/70LE600U [5] SUPPLIED ACCESSORIES/PACKING PARTS (LC-60LE600U) Enpuete Card Stand Base Ass'y Stand Support Ass'y X6 X7 X8 extend Warranty Connection guide Remote control unit “AA” size battery Operation manual Stand Screw Ass'y...
  • Page 54 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] SUPPLIED ACCESSORIES/PACKING PARTS (LC-60LE600U) Stand Base Ass'y CDAi-A778WJ31 Support Ass'y, x2 CANGKD276WJ01 Screw Ass'y CSAKKA011WJ01 Enpuete Card TCADEA290WJZZ Extend Warranty TGAN-A845WJN1 Operation Manual (English) TiNS-F576WJZZ Operation Manual (F) TiNS-F577WJZZ Operation Manual (S)
  • Page 55 LC-60/70LE600U [6] SUPPLIED ACCESSORIES/PACKING PARTS (LC-70LE600U) Ennquete Card Stand Base Ass'y Stand Support Ass'y X10 X11 Guarantee Card Connection guide Remote control unit “AA” size battery Operation manual Stand Screw Ass'y FRONT...
  • Page 56 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] SUPPLIED ACCESSORIES/PACKING PARTS (LC-70LE600U) Stand Base Ass'y CDAI-A778WJ31 Stand Support Ass'y, x2 CANGKD276WJ01 Stand Screw Ass'y CSAKKA011WJ01 Ennquete Card TCADEA290WJZZ Guarantee Card TGAN-A845WJN1 Operation Guide (E) TINS-F576WJZZ Conection Guide TMAN-A048WJZZ Remote Control RRMCGA667WJSA AAA size battery, x2...
  • Page 57 LC-60/70LE600U...
  • Page 58 LC-60/70LE600U COPYRIGHT © 2012 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
  • Page 59 SERVICE MANUAL No. S72X460LE600L LCD COLOR TELEVISION LCD Module Edition LC-60LE600U LC-70LE600U MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig- inal condition and only parts identical to those specified should be used.
  • Page 60 Information of service parts in the LCD Module • UNIT Model Name Unit Name Description LC-60LE600U R1LK600D3GV0BZ 60" LCD PANEL MODULE Unit (LK600D3GV0BZ) LC-70LE600U R1LK695D3GW8BD 70" LCD PANEL MODULE Unit (LK695D3GW8BD) NOTE: When replacing the LCD control PWB, perform the VCOM adjustment.
  • Page 61 LC-60/70LE600U PartsGuide PARTS GUIDE No. S72X460LE600L LCD COLOR TELEVISION LC-60LE600U LC-70LE600U MODELS CONTENTS LCD PANEL MODULE UNIT LCD PANEL MODULE UNIT (LC-70LE600U) LCD PANEL MODULE UNIT (LC-60LE600U) Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
  • Page 62 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [1] LCD PANEL MODULE UNIT 60" LCD PANEL MODULE Unit (LK600D3GV0BZ) (LC-60LE600U) R1LK600D3GV0BZ 70" LCD PANEL MODULE Unit (LK695D3GW8BD) (LC-70LE600U) R1LK695D3GW8BD...
  • Page 63 LC-60/70LE600U [2] LCD PANEL MODULE UNIT (LC-60LE600U) 60" LCD Panel Unit 20 19...
  • Page 64 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [2] LCD PANEL MODULE UNIT (LC-60LE600U) 60" LCD PANEL MODULE Unit (LK600D3GV0BZ) R1LK600D3GV0BZ Reflection Sheet PREFL3457TPZZ Double side Tape PTPEH2887TPZZ Reflection Sheet PREFL3456TPZZ Spacer, x2 PSPAG1167TPZZ Light Guide Plate PLGPA0803TPZZ Micro Lens Sheet...
  • Page 65 LC-60/70LE600U [3] LCD PANEL MODULE UNIT (LC-70LE600U)
  • Page 66 LC-60/70LE600U PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [3] LCD PANEL MODULE UNIT (LC-70LE600U) 70" LCD PANEL MODULE Unit (LK695D3GW8BD) R1LK695D3GW8BD P Chassis Unit (Left/Up) CHLDZ4981TP04 P Chassis Unit (Right/Up) CHLDZ4982TP04 P Chassis Unit (Left/Down) CHLDZ4983TP04 P Chassis Unit (Right/Down) CHLDZ4984TP04 P Chassis Unit (Left) CHLDZ4985TP04...
  • Page 67 LC-60/70LE600U...
  • Page 68 LC-60/70LE600U COPYRIGHT © 2012 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-70le600u

Table of Contents