Console-Key Special Function Features - Bose AV28 Manual

Console-Key Special Function Features

With the system off and powered applied, the following features are active as long as the "Store"
key is held down. Releasing the "Store" key cancels the mode unless otherwise noted.
1. House Code: Pressing "Store" allows you to set the product's house code for the RF remote.
Refer the "Changing House Codes" section of this manual.
2. Software Revision: Pressing "Store" and "Enter" brings up a new set of information screens.
The first press of "Enter" reveals the software version string. The second press reveals the serial
number. The third and fourth press reveals information about Zone connections. The fifth press
reveals the DVD region code. The sixth press reveals the tuner board type. The seventh press
reveals the UEI IR blaster code revision string. Each subsequent press cycles through these
seven messages.
3. NTC-7 Video Test Pattern: Press "Store" and "Enter" until the software revision is shown. At
this point, pressing "Erase" will toggle the NTC-7 video test pattern on and off. You do not need to
leave your fingers on the buttons to keep generating the pattern.
4. Self Tests: To see the results of the self tests, press "Store" and then toggle "Enter" until the
tuner board type is shown. At this point, while pressing "Store" and "Enter", toggling "Eject" will
move forward through the list of tests. Each test is shown on the VFD display, and the result or
results are shown on each subsequent press of "Eject."
70