Setting-Up A Computer To Issue Tap Commands - Bose AV28 Manual

Setting-up a Computer to Issue TAP Commands

1. Open a terminal window. Click: Start/Pro-
gram/Accessories/Hyperterminal/Hyperterminal
2. In the "Connection Description" window, type
the name "AV 28 media center" then click "OK";
any name may be entered.
3. In the "Connect To" window, select the COM
port on your computer that you will be connect-
ing the AV28 media center to and then click OK.
Note: Terminal programs other than
hyperterminal can be used.
6. In the Settings window, click on
ACSII setup and make the selec-
tions and changes as shown.
4. In the "COM1 Properties" window, make the
selections in the various fields as shown.
5. In the Hyperterminal window, click on File/
Properties. In the Properties window, click on
the Settings tab, make the selections in the
various fields as shown.
31