Installing the Handles
Elevation and Bevel Hand Wheels
The elevation and bevel handles are packaged together in the
box, please install as follows:
1.
Insert one handle
PC14
in the front of the saw, as seen in Figure 18.
2.
Insert one handle
PC14
the side of the saw, as seen in Figure 19.
Installing the Handle
Rip Fence
The rip fence handle is packaged individually and labeled
accordingly, please install as follows:
1.
Insert the labeled handle
Figure 19.
ASSEMBLY
to the elevation hand wheel located
to the bevel hand wheel located on
to the rip fence as seen in
PC15
PC15
17
PC14
Figure 18
PC14
Figure 19