DUST COLLECTOR
Connect a shop vacuum or dust collection hose to dust port on
back of saw for best dust collection. Dust port is designed for a 2
1/2 inch vac hose.
TURNING THE SAW ON AND OFF
The ON/OFF paddle switch is located on the left side of the front
panel of the saw.
1.
Press the green "ON" button.
2.
Press the switch down to turn the saw OFF.
3.
When not in use, the saw should be turned off and the power
switch locked out to prevent unauthorized use. To lock out
power switch, use a standard long shackle lock, with a shackle
post no larger than 9/32 inch (7mm) diameter.
See Figure 43.
OPERATION
LOCK
LOCK
OUT
OUT
28
FIGURE 42
ON
ON
OFF
OFF
FIGURE 43