Features; Assembly; Product Specifications; Dust Chute - RIDGID R32031 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS

Blade Diameter ......................................................6-1/2 in.
Blade Arbor .............................................................. 5/8 in.
Cutting Depth at 90° ..............................................2-1/8 in.
Cutting Depth at 45° ..............................................1-5/8 in.
Cutting Depth at 50° ..............................................1-1/2 in.
KNOW YOUR CIRCULAR SAW
See Figure 1, page 17.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.

DUST CHUTE

To direct saw dust and chips away from the operator, a dust
chute is located on the rear of the upper blade guard.
ERGONOMIC DESIGN
The design provides for easy handling. It is designed for
comfort when operating in different positions and at differ-
ent angles.
EXTERNALLY ACCESSIBLE BRUSHES
Externally accessible brushes extend the life of the machine.
FRONT AND REAR KERF INDICATORS
The front kerf indicator aides in following the line of cut
when cutting the workpiece. The rear kerf indicator aids in

ASSEMBLY

UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may
have been improperly assembled could result in
serious personal injury.
No Load Speed .................................... 6,100 r/min. (RPM)
Input ................................120 V, 60 Hz, AC only, 12 Amps
Net Weight ................................................................. 8 lbs.
aligning plunge cuts and following the kerf when exiting the
workpiece.
HEX KEY STORAGE
Hex key storage is located on the saw base. The storage area
can be accessed by adjusting the saw to a bevel position.
INDEXING LEVERS
The lock levers on the saw can be repositioned to suit user
preference.
PLYWOOD ID SYSTEM
Quickly identify common plywood thicknesses using the
plywood ID system.
SHOCK ABSORBING FRONT HANDLE
The handle is designed for durability and operator comfort.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turning
the blade screw for blade changes.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.

PACKING LIST

6-1/2 in. Circular Saw
18-tooth Carbide Tipped Blade
Hex Key
Operator's Manual
8 - English