Table of Contents
Advertisement
Problem:
The lens Is pulled In when the
POWER Is switched off.
Picture Is L/R Reversed.
Picture Is T/B inverted.
Some
are not seen
displays
during the operation.
Remote control unit doesn't
work.
Wireless mouse function does
not work.
Check AUTO RETRACT function.
(See "OTHER FUNCTICN SETTING" section on pages
Check Ceiling/Rear feature.
(See "OTHER FUNCTION SETTING" section on pages
Check Ceiling feature.
(See "OTHER FUNCTION SETTING" section on pages 44 - 45).
Check Display feature.
(See "OTHER FUNCTION SETTING" section on pages
Check audio cable connection from audio input source.
l
Adjust audio source.
l
Press the VOLUME (+) button.
l
Press the MUTE button.
l
Check the batteries.
l
sensor and remote control unit.
Make sure you are,not too far from the projector when using the
l
remote control unit. Maximum operate range (5 m).
l
Check the cable connection between the projector and the
computer.
Check the mouse setting on your computer.
l
l
Turn on the projector before you turn on the computer.
Try these Solutions:
Advertisement
Table of Contents
