Table of Contents
Advertisement
1. Before Using the Product
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in an
explosion, fire, electric shock, or failure.
CAUTION
-
The Board must be plugged into an expansion slot conforming to the PCI Bus Standard on a PC.
-
Do not impact or bend the board.
Doing so may result in a malfunction, overheating, fault, or damage.
-
Do not plug or unplug any board into or from the expansion slot with the PC or
expansion chassis powered. Doing so may result in a malfunction, overheating, fault, or damage.
Be sure to turn off the PC or expansion chassis and unplug their power cables before plugging or
unplugging any expansion board.
-
Do not plug or unplug the cable interconnecting the PC and expansion chassis with the PC or
expansion chassis powered.
-
Do not connect any signal other than specified to the on-board connector.
Doing so may result in a malfunction, overheating, fault, or damage.
-
If a specific expansion slot is recommended for a board, plug the board into that slot.
Doing so may result in a malfunction, overheating, fault, or damage.
-
When plugging or unplugging the power cable, be sure to hold it by the plug itself.
-
Do not use or store the board where it is exposed to any chemical either directly or as vapor in the air.
-
The specifications of this product are subject to change without notice for enhancement or quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
-
Do not modify this product.
CONTEC will bear no responsibility for any problems, etc., resulting from modifying the product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use of or inability to use this
CONTEC product or the information contained herein.
6
EAD(PCI)BE, EAD(LPCI)BE
Advertisement
Table of Contents
