Environment; Inspection; Storage - Contec EAD(PCI)BE User Manual

Environment

Use these products in the following environment. If used in an unauthorized environment, the board may
overheat, malfunction, or cause a failure.
Operating temperature
0 - 50°C
Humidity
10 - 90%RH (No condensation)
Corrosive gases
None
Floating dust particles
Not to be excessive

Inspection

Inspect the product periodically as follows to use it safely.
- Check that the bus connector
of the board and its cable have
been plugged correctly.
The photo is of the BUS-PC(PCI)A but the check points are the same as with the BUS-PC(LPCI)A.

Storage

When storing these products, keep it in its original packing form.
(1) Put the board in the storage bag.
(2) Wrap it in the packing material, then put it in the box.
(3) Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
EAD(PCI)BE, EAD(LPCI)BE
- Check that the board has
no dust or foreign matter adhering.
- The gold-plated leads of the bus connector
have no stain or corrosion.
1. Before Using the Product
7