Table of Contents
Advertisement
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
-
ExpressCard [BUS-PC-EC] must be connected to the ExpressCard slot on the PC.
-
Do not touch any externally connected connector as long as this product is turned on. Otherwise,
it may malfunction due to static electricity or other factor.
-
Do not apply impact loads to or bend the ExpressCard [BUS-PC-EC].
Doing so may result in a malfunction, overheating, fault, or damage.
-
Do not plug or unplug any ExpressCard [BUS-PC-EC] into or from the Card slot with the PC or
expansion chassis powered.
-
Do not plug or unplug the cable interconnecting the ExpressCard [BUS-PC-EC] and the expansion
chassis with the PC or expansion chassis powered.
-
When plugging or unplugging the power cable, be sure to hold it by the plug itself.
-
Do not use or store this product where it is exposed to any chemical either directly or as vapor in the
air.
-
The specifications of this product are subject to change without notice for enhancement or quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
-
Do not modify this product.
CONTEC will bear no responsibility for any problems, etc., resulting from modifying the product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use of or inability to use this
CONTEC product or the information contained herein.
-
Do not use or store the product near equipment generating a strong magnetic field or radio waves.
It may cause malfunction.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
EAD-CE-EC
1. Before Using the Product
5
Advertisement
Table of Contents
