Table of Contents
Advertisement
1. Before Using the Product
This chapter provides information you should know before using the product.
About the Board
The EAD(PCI)BE or EAD(LPCI)BE is an expansion adapter that connects the optional expansion
chassis ECH(PCI)BE to a PC to extend a PCI bus expansion slot in the PC, thereby providing additional
PCI bus expansion slots.
Features
-
Capable of expand the PCI bus (5V/32-bit, 33 MHz) from a single PCI bus slot in the PC.
-
Expansion chassis free of choice according to the number of PCI bus slots and the board size required.
-
Power supply controllable in response to the turning on/off of the PC's power supply.
-
Supporting both of Low Profile and standard PCI slots (exchangeable with the bundled bracket).
< EAD(LPCI)BE >
Expansion chassis (Option)
PCI Bus Expansion Chassis
PCI Bus Expansion Chassis (Short x 2Slots)
PCI Bus Expansion Chassis (Long x 2Slots)
PCI Bus Expansion Chassis (Short x 4Slots)
PCI Bus Expansion Chassis (Long x 4Slots)
PCI Bus Expansion Chassis (Short x 4Slots)
PCI Bus Expansion Chassis (Short x 7Slots)
PCI Bus Expansion Chassis (Long x 7Slots)
PCI Bus Expansion Chassis (Short x 13Slots)
PCI Bus Expansion Chassis (Long x 13Slots)
Check the CONTEC's Web site for more information on these expansion chassis.
EAD(PCI)BE, EAD(LPCI)BE
: ECH(PCI)BE-H2B
: ECH(PCI)BE-F2B
: ECH(PCI)BE-H4B
: ECH(PCI)BE-F4B
: ECH(PCI)BE-H4A
: ECH(PCI)BE-H7A
: ECH(PCI)BE-F7A
: ECH(PCI)BE-H13A
: ECH(PCI)BE-F13A
1. Before Using the Product
1
Advertisement
Table of Contents
