Adjusting Contrast/Brightness For Black And White Scan Mode - Canon MultiPASS L60 Software User's Manual

2. To add a handle to the tone curve, click on or near the curve.
3. To move a handle, drag the handle into a white area and release it.
4. To remove a handle, do one of the following:
• Drag the handle outside the tone graph
• Right-click your mouse pointer on the handle.
5. To undo all changes that you have made to the curve, click Reset.
To save your custom curve, click Save. In the Save As dialog box,
enter a file name and directory. Click Save.
Using a Custom Tone Curve
Use the following steps to open a custom tone curve setting that you
saved previously.
To apply a previously saved curve:
1. On the Tone tab, click the Special Tone Curves button, and then click
Load.
2. In the Open dialog box, select the file name you want to load. Click
Open.
Adjusting Contrast/Brightness for Black and White Scan
Mode
For black and white scans, the contrast and brightness settings are located
on the L60 tab.
Depending on the black and white option you choose for your scan, you
can adjust the contrast, brightness, or both of your preview image.
If you use halftone as your scan option, you can adjust both the contrast
and brightness of the image.
Chapter 6 Scanning 6-25