Download Print this page

Smeg LSP367X Manual page 14

Advertisement

User instructions
ENERSAVE
This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. This ensures perfect drying and greater
control of rinsing temperatures, which can be kept at lower levels for
significant energy saving. Once the door has opened, the end of the
wash cycle is indicated by a short beep.
Enersave is activated automatically every time a wash cycle is
selected (except for programs that do not include the final drying phase;
see programs table) and can be disabled before the program is started.
Flexi Tabs, once selected, remains enabled until intentionally disabled.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening as this would
damage the mechanism. Wait for the pushers to retract before re-closing
the door.
Flexi Tabs
Specifically for washing with combination detergents in tablets, which
also contain salt and rinse aid (3in1) or other agents such as glass
protector, steel rinse aids, etc. (4in1, 5in1...). When this option is
selected, salt and rinse aid will not be dispensed even if the relative
compartments contain them. If the containers are empty, the lights will
remain on.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
For further information, refer to the detergent pack.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
14

Advertisement

loading