Advertisement
START PROGRAM
At this point, in order to start the machine, it is only enough to press the
START/PAUSE (6) for some seconds until the symbol START/PAUSE
(D) start to flash and confirmation "beep" is heard. From this moment the
cycle duration on the DISPLAY (9) starts to decrease.
This phase, that updates itself during the cycle, is "indicative" since it is
influenced by the washing conditions such as dishwasher type and
quantity, entry temperature etc. For this reason it is normal to see the
updating during a program (increment and decrease of minutes)
specially in the passage from one phase to the other (for example, from
washing to rinse).
END PROGRAM
The end of the program is indicated by a short signal acoustic and from
the "End" visual notification on DISPLAY.
buttons, the "End" visual signal will vanish from the display and the
dishwasher is ready to continue a new cycle.
INTERRUPTING A PROGRAM
In order to interrupt a running program it is necessary:
•
to press the START/PAUSE
symbol START/PAUSE remains lit on the display (confirmation
beep). At this point,it is possible to start the cycle again, otherwise:
•
TO CHANGE A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see "I
•
select the new program;
•
to press again the START/PAUSE button
program.
10
User instructions
By pressing one of the
for some seconds until when the
NTERRUPTING A PROGRAM
to make start the new
");
Advertisement
