Table of Contents
Advertisement
GENERAL
RECHARGING BATTERIES
The Konftel 300Mx lets you know when the battery's remaining capacity is less than one
hour of talk time. An audible signal is emitted and the LEDs flash three times. The battery
recharging symbol on the display screen will also start flashing.
Recharge the Konftel 300Mx by placing it on the charging stand.
The battery can also be recharged by plugging the power cable into the Konftel 300Mx.
Batteries
The battery has a button to display the battery's remaining capacity.
The Konftel 300Mx comes with a charged battery, but it may need recharging to full capacity
depending on how long it has been in storage.
A fully-charged battery provides talk time of about 30 hours or 25 days of standby time. The
Konftel 300Mx automatically switches to sleep mode after a few minutes of inactivity.
Warning!
• Do not attempt to open or modify the battery.
• Do not expose the battery to moisture or extreme heat.
• Extreme heat, short-circuiting or any attempt to modify the battery may cause it to ignite
or explode.
• Only use the battery provided or a Konftel-recommended replacement battery.
Battery charger (optional)
The optional battery charger allows for external recharging of one or two batteries. Charge
status is denoted by the LED for each charging channel on the charger. The LED is red dur-
ing charging and green when the battery is fully charged. A red flashing LED indicates that
the battery is damaged and must be replaced.
10
Advertisement
Table of Contents
