Canon Color imageCLASS MF8050Cn Basic Operation Manual page 95

Receives a fax automatically. (An incoming call rings. To configure so that the incoming call does not ring,
Fax/Tel mode
see "Incoming Ring" (→P.6-25))
Respond to a telephone call by picking up the handset.
Operation for when an incoming call is received
An incoming call rings for the specified number of times.*1
When you do not pick up the handset
within the specified number of times
The machine judges whether the
incoming call is a fax or voice call.*2
When the call is
a fax
The machine receives
the fax automatically.
When you pick up the
handset during ringing
You can start talking as is.
Receives a fax automatically.
Answer mode
The answering machine records a message for telephone calls.
Operation for when an incoming call is received
The telephone rings the number of times specified for the built-in
answering machine.*1
When you pick up the handset during
ringing
When the call is a fax
You can hear a beep.
Following the procedure
below, receive the fax.
(1) Press [Fax].
(2) Select <Start Receiving>
with [ ] or [ ], and then
press [OK].
(3) Hang up the handset.
When the call is a fax
You can hear a
beep.Following the
procedure below, receive the
fax.
(1) Press [Fax].
(2) Select <Start Receiving>
When the call is
a voice call
(3) Hang up the handset.
The telephone rings.*3
When you do not pick up
the handset during ringing
The machine hangs up the
telephone or switches to the fax
receive mode.*4
When the call is a
voice call
You can start talking as
is.
When you pick up the handset within
the specified number of times
with [ ] or [ ], and then
press [OK].
*1 You can change the number of times the incoming call
rings in "Incoming Ring" on P. 6-25.
* 2 You can set the time taken to judge in <Ring Start
Time>.
* 3 You can change the ringing time in <Incoming Ring
Time>.
* 4 Specify which operation is performed in <After Ring>.
The above settings between *2 and *4 can be specified in
"Detailed Settings for the Fax/Tel Mode" on P. 6-13.
When the built-in answering machine
starts up
When the call is a fax
The machine receives the
fax automatically.
1
* Set your answering machine to answer after a few rings.
2
* Record a message on your answering machine.
(It is recommend that you insert about 4 seconds of silence at the
beginning of the message or limit the message within 20 seconds.)
When the call
is a voice call
You can start
talking as is.
When the call is a
voice call
The built-in answering
machine records the
message.*2
6-11