Lubrication; Replacing A Headlight Bulb - Yamaha PZ50RTD Owner's Manual

Table of Contents

Advertisement

Periodic maintenance and adjustment
ECS00610
NOTICE
Only use in deep snow riding condi-
tions.
Operation on areas with light snowfall,
ice, hard-packed snow, dirt, or grass will
result in rapid wear or damage to the
track and slide runners from lack of
snow which serves as a lubricant.
ESU12198

Lubrication

Lubricate the following points with the speci-
fied grease.
EWS00511
WARNING
Do not grease the throttle cable because it
could become frozen, which could cause
loss of control. Apply a dab of grease onto
the cable end only.
TIP
For parts equipped with a grease nipple, use
a grease gun.
Lubricants:
Brake lever:
Silicone grease
Other lubrication points:
Low-temperature grease
1. Lubrication point
84
1. Throttle cable end
PZ50RT / PZ50GT / PZ50MT
1. Grease nipple
PZ50VT / PZ50MP
1. Grease nipple
ESU12242

Replacing a headlight bulb

1
1.
Remove
PZ50GT / PZ50MT) or open the shroud
(PZ50VT / PZ50MP). (See page 60 for
removal procedures.)
2.
Disconnect the headlight coupler.
1
the
top
cover
(PZ50RT /

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pz50gtdPz50mtdPz50vtdPz50mpd

Table of Contents