Yamaha PZ50RTD Owner's Manual page 49

PZ50GT / PZ50VT (CAN)
(b)
(a)
1. Spring preload adjusting ring
PZ50MT (CAN)
(b)
(a)
1. Spring preload adjusting ring
Spring preload setting:
Minimum (soft):
1
Standard:
PZ50GT / PZ50VT (CAN) 1
PZ50MT (CAN) 3
Maximum (hard):
5
Center shock absorber [PZ50RT / PZ50MT
(FIN)(SWE)(RUS) / PZ50VT (FIN)(SWE) /
PZ50MP]
1. Loosen the locknut.
2. To increase the spring preload and there-
by harden the suspension, turn the ad-
justing nut in direction (a). To decrease
the spring preload and thereby soften the
suspension, turn the adjusting nut in di-
rection (b).
Control functions
(b)
1. Spring preload adjusting nut
2. Distance A
3. Locknut
TIP
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The longer distance A is, the higher the
spring preload; the shorter distance A is, the
lower the spring preload.
1
3
2
(a)
41